Spindle Roughing Gouge long cut HSSE GURTOOL, 20 mm

Spindle Roughing Gouge long cut HSSE, GURTOOL, 20 mm

Spindle Roughing Gouge for large material removal, mainly during spindle turning. It features a robust body with a shallow groove for good chip removal from the material.
It can also be used for machining external surfaces in hollow turning and bowl turning. It is also suitable for finishing work.

The spindle comes with a sharpened blade, which is protected by a rubber cover.

Parameters

Diameter - 20 mm
Length - 370 mm
Material - HSSE with cobalt
Hardness - 62 - 64 HRC
Handle - without handle

Notice

Carefully measure the log diameter before making the handle and drilling the insertion hole. The tool diameter may vary slightly in different production runs. The recommended length of insertion into the handle is 80 - 90 mm.